Formation and Characteristics of Acrylonitrile/Urea Inclusion Compound

The formation process and composition of the acrylonitrile/urea inclusion compounds (AN/UIC) with different aging times and AN/urea molar feed ratios are studied by differen-tial scanning calorimetry (DSC) and X-ray diffraction (XRD). It is suggested that DSC candetermine the guest/host ratio and the heat of decomposition. Meanwhile, the guest/host ratio and heat of decomposition are obtained, which are 1.17 and 5361.53 J/mol, respec-tively. It is suggested AN molecules included in urea canal lattice may be packed flat against each other. It is found that the formation of AN/UIC depends on the aging time. XRD results reveal that once AN molecules enter urea lattice, AN/UIC are formed, which possess the final structure. When AN molecules are sufficient, the length of AN molecular arrays in urea canals increases as aging time prolonging until urea tunnels are saturated by AN.     

混合模式色谱材料Click TE-GSH高效富集多磷酸化肽

多磷酸蛋白对于生物体适应内外环境具有重要意义,而明确多磷酸蛋白的磷酸位点功能及其信号转导机制尤为关键. 复杂生物样品中多磷酸化肽的低丰度、低电离的特性,以及非磷酸化肽的抑制作用,决定了质谱分析前进行多磷酸化肽富集是非常必要的步骤. 本工作采用基于巯基-烯烃点击化学法合成的混合模式材料Click TE-GSH进行单磷酸化肽和多磷酸化肽的选择性富集. 我们建立了单磷酸化肽、双磷酸化肽和多磷酸化肽的顺序分段富集方法. 该优化方法能抗干扰,应用于脱脂牛奶时富集到11条多磷酸化肽. 与商品化固化金属亲和色谱(IMAC)材料相比,Click TE-GSH富集多磷酸化肽的选择性更好. 本工作所建立的富集方法为高效富集多磷酸化肽提供新方法和新技术.     

气相色谱-串联质谱法快速筛查测定中药材中144种农药残留

利用气相色谱-串联质谱(GC-MS/MS)检测技术,采用QuEChERS法作为样品前处理方法,建立了能应用于11种中药材中144种农药残留的检测方法。探究了样品前处理过程中提取溶剂、缓冲盐体系、净化剂组成和用量对样品提取、净化等方面的影响,最终确定了用乙腈提取,甲苯复溶,以混合净化剂净化,过有机膜后经GC-MS/MS测定,外标法定量。144种农药在10~2000 μg/kg之间线性关系良好,相关系数(r²)>0.983;除乙酰甲胺磷、灭虫威、西玛津、克菌丹、异狄氏剂、异菌脲外,其余农药的定量限(LOQ)均低于20 μg/kg;在20、50、200 μg/kg的添加水平下,除乙酰甲胺磷、艾氏剂和双甲脒回收率偏低外,其余141种农药的平均回收率在74.3%~111.8%之间,相对标准偏差(RSD)为0.5%~14.6%。与已有的标准方法对比,此方法不仅检测结果一致,而且高效、快速,准确性好,灵敏度高,适用于中药材中144种农药残留的快速筛查与定量分析。     

Bias dependence of a deep submicron NMOSFET response to total dose irradiation

Deep submicron n-channel metal-oxide-semiconductor field-effect transistors (NMOSFETs) with shallow trench isolation (STI) are exposed to ionizing dose radiation under different bias conditions.The total ionizing dose radiation induced subthreshold leakage current increase and the hump effect under four different irradiation bias conditions including the worst case (ON bias) for the transistors are discussed.The high electric fields at the corners are partly responsible for the subthreshold hump effect.Charge trapped in the isolation oxide,particularly at the Si/SiO 2 interface along the sidewalls of the trench oxide creates a leakage path,which becomes a dominant contributor to the offstate drain-to-source leakage current in the NMOSFET.Non-uniform charge distribution is introduced into a threedimensional (3D) simulation.Good agreement between experimental and simulation results is demonstrated.We find that the electric field distribution along with the STI sidewall is important for the radiation effect under different bias conditions.     

Influence of cesium on the stability of a GaAs photocathode

The stability of a reflection-mode GaAs photocathode has been investigated by monitoring the photocurrent and the spectral response at room temperature.We observe the photocurrent of the cathode decaying with time in the vacuum system under the action of Cs current,and find that the Cs atoms residing in the vacuum system are helpful in prolonging the life of the cathode.We examine the evolution and analyse the influence of the barrier on the spectral response of the cathode.Our results support the double dipolar model for the explanation of the negative electron affinity effect.     

Propagation of high-power partially coherent fibre laser beams in a real environment

The propagation performance of high-power partially coherent fibre laser beams in a real environment is investigated and the theoretical model of a high-power fibre laser propagating in a real environment is established. The influence of a collimating system and thermal blooming is considered together with atmospheric turbulence and mechanical jitter. The laser energy concentration of partially coherent beams in the far field is calculated and analysed based on the theoretical model. It is shown that the propagation performance of partially coherent beams depends on the collimating system, atmospheric turbulence, mechanical jitter and thermal blooming. The propagation performance of partially coherent beams and fully coherent beams is studied and the results show that partially coherent beams are less sensitive to the influence of thermal blooming, which results in that the energy degeneration for partially coherent beams is only 50% of that for fully coherent beams. Both partially coherent beams and fully coherent beams become less sensitive to thermal blooming when the average structural constant of the refraction index fluctuations increases to 1.7 × 10^-14 m^-2/3. The investigation presents a reference for applications of a high-power fibre laser system.     

Load optimal design for a primary test stand facility based on a zero-dimensional load model

In order to couple the numerical simulation of a primary test stand driver with an optimal load design, a zero-dimensional wire array load model is designed based on the Saturn load model using PSPICE, which is an upgraded version of the Simulation Program with Integrated Circuit Emphasis (SPICE) designed by the ORCAD Corporation to perform circuit simulations. This paper calculates different load parameters and discusses factors influencing the driving current curve. With appropriate driving current curves chosen, further magneto-hydrodynamic calculations are carried out and discussed to provide the best results for experiments. The suggested optimal load parameters play an important role in experimental load design.     

粒子与聚合物协同稳定高内相Pickering乳液

选用二氧化硅纳米粒子(H30)和聚(乳酸-羟基乙酸)共聚物(PLGA)为复合稳定剂, 成功制备出内相体积分数高达90%的高内相Pickering 乳液. 对照实验表明: 单独用H30粒子作稳定剂, 内相体积分数上限为75%; 单独用PLGA 作稳定剂, 发生严重相分离, 不能形成乳液. 无机纳米粒子与聚合物之间的协同作用在制备高内相乳液的过程中起到了关键作用. 因此, 使用无机粒子和聚合物作为混合稳定剂制备高内相乳液是一种新型而有效的方法.     

Multiferroic tunnel junctions

Magnetic tunnel junctions with ferroelectric barriers, often referred to as multiferroic tunnel junctions, have been proposed recently to display new functionalities and new device concepts. One of the notable predictions is that the combination of two charge polarizing states and the parallel and antiparallel magnetic states could make it a four resistance state device. We have recently studied the ferroelectric tunneling using a scanning probe technique and multiferroic tunnel junctions using ferromagnetic La_0.7Ca_0.3MnO₃ and La_0.7Sr_0.3MnO₃ as the electrodes and ferroelectric (Ba, Sr)TiO₃ as the barrier in trilayer planner junctions. We show that very thin (Ba, Sr)TiO₃ films can sustain ferroelectricity up till room temperature. The multiferroic tunnel junctions show four resistance states as predicted and can operate at room temperatures.     

Properties of a dielectric plate using entangled two-photon states

We theoretically study the properties of a dielectric plate with a modified Hong-Ou-Mandel interferometer. The fourth-order correlation functions are calculated in two regimes, which are divided depending on the relative size between the thickness of the dielectric plate and the one-photon coherence length. When the thickness of the dielectric plate is less than the one-photon coherence length, a novel modulation behavior of the coincidence rate is observed, which has not been discussed before. If the thickness of the dielectric plate is larger than the one-photon coherence length, coalescence and anti-coalescence are observed. The obtained results highlight the effects of a linear optical element on fourth-order interference.